Pitco Parts
Pitco Parts was established in 1918 by JC Pitman and is currently based out of Concord, NH.
Pitco Specializes in the manufacturing of high-quality fryers, Food Equipment
parts rethermalizers and pasta cookers. Pitco parts are commonly used in fryers,
rethermalizers, and pasta cookers. In order to improve the quality of fried food, in 1918, J.C.
Pitman discovered that settling particles of food in a fryer could be kept away from the hottest
part of the kettle. That is why pitco parts came into existence.
Now, Pitco is having its operations out of Concord, New Hampshire. There are ROV Fryers
manufactured by pitco using 40% less oil along with boasting triple oil life for added
savings. Pitco parts and pitco replacement parts are available in the huge collection with
us. Restaurant Parts
How to Clean Pitco Fryer?
Perform the initial & daily cleaning of the fryer as described below. Also, you can check out the
instructions for how to boil out a Pitco fryer.
Initial Cleaning
Generally, while shipping many parts of the Pitco fryer are coated with oil for protection. So,
you should clean it before starting the cooking. If you clean it, oil coating will be removed and
removes any foreign particles that are accumulated during shipment or storage. You can follow
the cleaning process as below given.
1. Fill the tank with water and add a mild detergent or one packet of Pitco fryer cleaner.2. Turn on your fryer and set the thermostat temperature to 200 degrees Fahrenheit. Leave
the unit for 15 minutes to heat. Make sure the water level is not below the oil level mark
on the back of the fry tank.
3. With a fryer cleaning brush, you have to scrub the interior for removing the protective
coating.
4. After completion of fryer cleaning, turn off the main burners and turn the gas valve knob
to the "Pilot" position.
5. Now, drain the water from tank to a container that is suitable for hot water.
6. When the fryer's tank is cooled, rinse it thoroughly with cool water. You need to continue
to rinse it until the cleaner is removed completely from the tank.
7. Wipeout all water with a clean dry cloth. You should wipe out the water thoroughly as
any residual water causes hot oil to splatter out of the unit.
Note: Mild steel tanks must be wiped down or coated with oil to keep the tank free from
rusting.
1. Now, the tank is clean and you are ready to fill and operate your fryer.
Shop for OEM and Great Quality Pitco Fryer Parts!
Daily Cleaning
If you have done this procedure daily, your Pitco fryer will run effectively and give peak
performance for years to come.
Wipe down the exterior fryer: With a clean soft or microfiber cloth, you need to wipe up
shortening that spills onto the exterior surfaces of the Pitco fryer. Better to do this when
the oil is warm.
To clean unit surfaces, use a mix of warm water and mild detergent. Make sure not to
get water in the shortening. Rinse the fryer completely and dry thoroughly before use.
Use a non-abrasive scouring powder or pad to clean stains if you find stains from grease
or other food remnants.
Pitco Replacement Parts for your Fryer - Order Online!
Weekly Cleaning - How to Boil Out a Pitco Fryer?
The Pitco fryer has to be cleaned once a week. This is the right time if you want to replace the
filter paper. The cleaning includes complete draining of the fryer and boils out.You will need a large container to hold the volume of the tank. This container should also be
able to withstand boiling water temperatures. When the oil is replaced by water or heating
portion cleaning is completed, you have to shut off the fryer completely. This will prevent the
heating system from coming on during the oil draining and water filling procedure.
You have to drain the oil from the fryer and discard it. You can also reuse it. Remove tube rack
or mesh tube screens and remove any debris from the bottom of the fry tank. Clean them.
Once the cleaning is completed, return mesh screens and tube racks to the fry tank. Close the
drain valve and fill the tank with a mixture of non-caustic detergent and water. You can use
cleaner for best results.
Restart the fryer. When the temperature of unit gets 100 degrees centigrade, it will go to "Boil"
mode and bring the water to a slow boil. Once the water is at a slow boil, turn off the unit.
Soak the fryer for 20 minutes to soften shortening deposits and carbon. By using a fryer brush,
remove any residue from heating tubes, tank, and sidewalls. You need to perform standard
daily cleaning after scrubbing the tank.
Remove the filter from the unit. Next, slide a container to catch the water under the fryer so
that the pipe which is normally aimed into the filter pan is aimed into the container and open
the drain valve.
Drain the hot water to the taken container and rinse the fry tank with clean warm water.
Wipe the fry tank dry with a clean cloth. After that, close the drain valve and remove the
container. Now, refill the tank.
Wrap-Up
We hope this guide on how to clean Pitco fryer helped you to avoid basic and common
problems which are caused by lack of maintenance. If these instructions do not clean your
unit, you can refer to the manufacturer’s manual. If you need any Pitco fryer parts, you can
purchase them from PartsFPS.
